What are the common maintenance tasks for a briquetting machin

Common maintenance tasks for a briquetting machine include the following aspects:

Cleaning: After each use, turn off the power and clean the machine. Remove any remaining materials in the feeding hopper, compression chamber, and on the surface of the machine. This prevents material buildup, which can affect the machine's performance and cause corrosion.
Visual Inspection: Check the machine's components visually. Look for any signs of wear, such as cracks, dents, or excessive abrasion on the rollers, pistons, and conveyor belts. Also, check for loose screws or bolts and tighten them if necessary.

Lubrication: Regularly lubricate the moving parts of the machine, such as the bearings, gears, and shafts, according to the manufacturer's instructions. Use the recommended lubricants to ensure smooth operation and reduce friction. This helps to prolong the service life of the components and prevent overheating.
Belt Tension Adjustment: Check the tension of the conveyor belts and drive belts regularly. If the belts are too loose, they may slip, affecting the feeding and operation of the machine. If they are too tight, it can cause excessive stress on the belts and related components. Adjust the belt tension to the appropriate level.
Filter Replacement: If the machine has air filters or oil filters, replace them regularly to ensure proper ventilation and prevent contaminants from entering the machine's internal components. Clean or replace the dust - collection system filters to maintain its efficiency.

Component Inspection and Replacement: Periodically inspect the key components of the machine, such as the rollers, dies, and compression springs. If any components are found to be worn out or damaged, replace them in a timely manner. This ensures the machine maintains its performance and the quality of the briquettes.
Calibration: Check and calibrate the machine's parameters, such as the compression force and feeding speed, regularly. This helps to ensure consistent briquette quality and efficient operation. Calibration may be required if there are changes in the material properties or if the machine shows signs of inconsistent performance.